Start by inserting the rod into one end and pushing it through until you feel resistance at the other side--this will help clear out any dirt or debris inside the barrel. Once finished, pull back on both ends (gently) while simultaneously scrubbing down with solvent-soaked patches.

Once you're finished, use a clean cloth to remove any excess dirt/solvent left behind and then replace the rod (with one of your spare) for safe-keeping until it is needed again.

Finally, wipe down all surfaces with a rag or damp towel before taking out any remaining bullets from the gun's magazine and closing up the action--this will ensure that no solvent makes its way into freshly loaded rounds when storage time arrives.

Conclusion

This article provides readers with tips on how to clean their guns and what tools are available to do so safely! In addition, this post includes information on which solvents should not be patches to remove all build-up residue from bores and chambers once again! 

Repeat as many times as necessary before finally removing gun cleaning rods, then using clean cloths/towels to dry off the machinery after each session of maintenance. This goes without saying but never let solvents come in contact with plastic parts (like magazines, grips, etc.) because this could result in a malfunction when firing! If you want to learn more, visit this website.